Compact Mechanical Wind-Up Twin Bell Alarm Clock for Small Spaces

Notice:

1. Fully wind up the clock every 24 hours.

2. If the time is inaccurate, you can correct it by adjusting the needle at the back. If the time is fast, you can adjust it by turning the (-) knob. If the time is slow, you can adjust it by turning the (+) knob. Each gradation represents approximately 6 minutes.

3. To adjust the hour and minute hands, push the button in the direction of the arrow to ensure the hands move clockwise. If you push it in the negative direction, it will create a gear gap. In this case, you'll need to push the button in the negative direction to correct the time by more than 20 minutes, then move it clockwise to correct the time. This will remove the gear gap.

4. When using the alarm, push the alarm button in the direction of the arrow to set the desired time. After setting the correct alarm, fully wind up the clock.

5. The alarm is valid only once after a full wind-up. When you need to reactivate the alarm, repeat step 4 after the previous alarm has finished sounding for 1.5 hours.

6. To stop the alarm, press the stop-alarm button (the white one).

7. A full wind-up can power the clock for 24 hours, with an accuracy tolerance of ±6 minutes.

8. The alarm has an accuracy tolerance of ±5 minutes.

This classic, antique-styled timepiece does not require batteries or electricity. It features offset seconds and alarm dials, as well as easy-to-read Arabic numerals. The hour markers and hands glow in the dark, and the alarm bells are loud. The wind-up mechanical timekeeping movement powers the clock.

The dimensions of the clock are 42.751.57 inches.

product information: